The new range of Eberspacher air heaters with the below software now will work with the below older Easystart controller range. Easystart Select, Easystart Timer, Easystart Remote + will now all work with the LIN system (blue/white wire)
Below you can see the D2L (Airtronic 2) wiring loom on the right and the select controller on the left. When fitting the EasyStart Select Controller, you will have to cut the RED and BROWN wire out of the Pro Controller link loom on the right and use them for the Select controller. (WARNING: you must cut further down the loom, in case you would like to re-join at a later date)
All other wires which are not used, please tape up making sure none of them are making contact.
The wires you need from the heater wiring loom are red, brown, and blue-white, which will match up with the Easystart Select loom. (see diagram below )
EasyStart Select LIN
